Fire Curtains and Smoke Curtains
The A1S Group have successfully manufactured and installed our fire curtains in 1000s of UK buildings, from hospitals, offices, homes and schools, to airports, cinemas, stadia, and shopping centres. Call us today to discuss compliance, quality and competitive pricing UK wide for your project. Our Flameshield range of fire and fire and smoke curtains offers 120 minutes integrity, smoke control and industry leading radiation performance to EW 120, with the added peace of mind that full witness sampling, cyclic testing, and furnace testing is carried out with Warrington Exova, Warrington Fire and Element.
Fully tested Fire Curtains to BS 8524-1 and BS 8524-2 And NOW TESTED TO AN INDUSTRY LEADING EW 120 minutes
Fast and Accurate Quotations
Flexible Lead Times UK Wide
Up to 120 minutes integrity
In house Cad Design
We are Highly Competitive
Testing Certification Upon Request
EW 120 Minutes Fully Cyclic Tested
UK’s Widest Selection of Parameters
BS 8524-1, BS 8524-2
EN BS 1634-1
EN BS 1634-3
EN BS 12101
Up To 8000mm x 4000mm Single (With Smoke Seals)
Up To 4000mm x 8000mm Single (With Smoke Seals)
50 metres x 5500mm Overlapping (No Smoke Seals)
All our Fire Curtains whether vertical or horizontal are fully compliance-tested and include fail-safe features enabling them to operate even if there’s a power failure.
And the Flameshield fire curtains have the added benefit of stylish designs which blend neatly with your venue’s decor. End-plates, guides and hoods can even be supplied in a variety of colours for a small additional cost.
Contact a member of our friendly sales team today for a chat about how the A1S Group can meet your project’s fire curtain requirements.
Egress switches, access switches, obstruction warnings, heat and smoke alarms are fully tested to the ancillary equipment Annex H as stipulated by BS 8524-1.
Gravity fail safe closes without mains power
Provides smoke control
Lightweight slimline compact design
2 stage closing operation
Compliance tested to maintain building fire safety and integrity in accordance with BS 8524-1 and installed in accordance with BS 8524-2
Can be hidden neatly above the ceiling line to assist the building design and aesthetics
Voice warning devices available
Fully resets after fire test without the need for engineers to attend
Low maintenance costs
Timed delay closing
Flameshield Fire Curtain
All our fire curtains whether vertical or horizontal are manufactured and produced in accordance with the parameters and technical respects indicated within specifications, which are submitted to the Warrington Fire Research Establishment. A1S Group fire curtains are tested and certified to BS 1634-1, BS 1634-3 in accordance with BS 8524-1.
Flameshield Fire Curtain Standard Panel
The panel continuously monitors the normally closed alarm input terminals, if the terminals go open, i.e alarm triggered, the shutter will close under power or via gravity to the fully closed position. Providing the alarm signal is cleared you can reopen the shutter accordingly.
Flameshield Fire Curtain Advanced Panel
The panel continuously monitors the normally closed alarm input terminals, if the terminals go open i.e alarm triggered, the shutter will close under power or via gravity to the fully closed position. Providing the alarm signal is cleared you can reopen the shutter accordingly.